Week 1

Hello, welcome to my first entry.

For our first lesson we were tasked to recreate a letting we did last semester. This entry will therefore be about using fusion 360 to create my keyring.

I started it by creating a rectangle 25mm X 65mm on a new project. I then used the offset feature 2mm.

Next I fillet the corners by 5mm and created a circle with a diameter of 5mm

I then inserted a random word that came to me. I then extrude the corners and text by 3.5mm.

I also extrude the base by 2mm. However I encountered a problem while extruding the text. The letter P could not be extruded. 

It took me awhile figuring out but I fixed the text extruding by removing the text sketch and retyping in a different font.

I then added some colour to the text and the keychain. poop colour for the text:)